View MHPA18010_1279121.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA The RF Line
SEMICONDUCTOR TECHNICAL DATA
Freescale Semiconductor, Inc.
Order this document by MHPA18010/D
CDMA Band RF Linear LDMOS Amplifier
Designed for Class AB amplifier applications in 50 ohm systems operating in the 1800 to 1900 MHz frequency band. A silicon FET design provides outstanding linearity and gain. In addition, the excellent group delay and phase linearity characteristics are ideal for digital CDMA and GSM modulation systems. * Typical CDMA Performance: 1840 MHz, 28 Volts IS-95 CDMA Pilot, Sync, Paging, Traffic Codes 8 Through 13 * Adjacent Channel Power: -51 dBc @ 30 dBm Average Power, 885 kHz Channel Spacing * Power Gain: 24.5 dB Min (@ f = 1840 MHz) * Excellent Phase Linearity and Group Delay Characteristics * Ideal for Feedforward Base Station Applications
MHPA18010
1805-1880 MHz 10 W, 24.5 dB RF HIGH POWER LDMOS AMPLIFIER
Freescale Semiconductor, Inc...
CASE 301AP-02, STYLE 3
MAXIMUM RATINGS (TC = 25C unless otherwise noted)
Rating DC Supply Voltage RF Input Power (Single Carrier CW) Storage Temperature Range Operating Case Temperature Range Symbol VDD Pin Tstg TC Value 30 +20 -40 to +100 -20 to +100 Unit Vdc dBm C C
ELECTRICAL CHARACTERISTICS (VDD = 28 Vdc, VBIAS 8 V Set for Supply Current of 600 mA, TC = 25C, 50 System)
Characteristic Supply Current Power Gain Gain Flatness Power Output @ 1 dB Comp. Input VSWR Noise Figure (f = 1840 MHz) (f = 1805-1880 MHz) (f = 1840 MHz) (f = 1805-1880 MHz) (f = 1840 MHz) Symbol IDD Gp GF P1dB VSWRin NF ACPR Min -- 24.5 -- -- -- -- -- Typ 600 25.5 0.2 41.5 1.5:1 8 -58 Max -- -- 0.5 -- 2:1 10 -51 dB dBc Unit mA dB dB dBm
Adjacent Channel Power Rejection @ 30 dBm Average Power, 1.23 MHz BW, 885 kHz Channel Spacing
REV 0
MOTOROLA RF Motorola, Inc. 2003 DEVICE DATA
For More Information On This Product, Go to: www.freescale.com
MHPA18010 1
Freescale Semiconductor, Inc.
PACKAGE DIMENSIONS
A G 0.020 (0.51)
M
A S
2X
Q 0.008 (0.20)
M
TS
M
A
M
TA
M
B
R J K W
4X 1 2 3 4
S
NOTES: 1. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION "F" TO CENTER OF LEADS. DIM A B C D E F G H J K L N P Q R S W INCHES MIN MAX 1.760 1.780 1.370 1.390 0.245 0.265 0.017 0.023 0.080 0.100 0.086 BSC 1.650 BSC 1.290 BSC 0.266 0.280 0.125 0.165 0.990 BSC 0.390 BSC 0.008 0.013 0.118 0.132 0.535 0.555 0.445 0.465 0.090 BSC MILLIMETERS MIN MAX 44.70 45.21 34.80 35.31 6.22 6.73 0.43 0.58 2.03 2.54 2.18 BSC 41.91 BSC 32.77 BSC 6.76 7.11 3.18 4.19 25.15 BSC 9.91 BSC 0.20 0.33 3.00 3.35 13.59 14.10 11.30 11.81 2.29 BSC
D
M
0.020 (0.51)
M
TB
N L H
Freescale Semiconductor, Inc...
F E C
4X
T
SEATING PLANE
P 0.020 (0.51)
M
T
STYLE 3: PIN 1. 2. 3. 4. CASE:
RF INPUT VBIAS VDD RF OUTPUT GROUND
CASE 301AP-02 ISSUE C
Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. E Motorola Inc. 2003 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1-800-521-6274 or 480-768-2130 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1, Minami-Azabu, Minato-ku, Tokyo 106-8573, Japan 81-3-3440-3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 HOME PAGE: http://motorola.com/semiconductors
MHPA18010 2
For More Information On This Product, Go to: www.freescale.com
MOTOROLA RF DEVICE DATA
MHPA18010/D

▲Up To Search▲

Price & Availability of MHPA18010

	To Download MHPA18010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .